An in-wall fireplace gives a sleek and polished look without the cost of a mantle. It is among the most simple electric fireplaces to set up.
There are a few aspects to consider before buying an in-wall fireplace. To get the most value from your investment, consider these suggestions:.
Height
While it may seem like something that is easy, figuring out the height of your fireplace is among the most important decisions you make. This is because the height of your fireplace will impact everything from how it fits in a room to how visible it is. If your fireplace is too high could look odd and take away from the beauty of the piece. On the other side having your fireplace too low will make it appear unattractive in the wall space.
Luckily, electric fireplaces are versatile enough to be installed at various heights. The majority of people place their fireplaces in a seated position at eye level. This requires a height of 40-42 inches. Some people put their fireplaces underneath their TVs. This can be an attractive alternative.
The size of your fireplace will depend on several factors, including the length and size of the wall you want to put it on. The larger the room and the bigger it is, the larger it will appear and it could mean that you can install an even larger fireplace. The length of a wall is also important since a wall that is larger can accommodate a bigger fireplace.
The way you intend to utilize your fireplace is an important factor. If you plan to use it for ornamental purposes, a lower level will work better. If you plan to use it to heat your house it is necessary to make sure that the fireplace is tall and sturdy enough to meet safety standards.
It is essential to choose the right height for your fireplace so that it will match your decor and be easy to clean or fill. If you're not sure of the height to go with it is always a good idea to reach out to an expert fireplace installer for assistance. They will be able to recommend the perfect height for your fireplace in light of their experience and your particular home.
Depth
The depth of a fireplace is crucial to know if you plan to install it in a recessed position. If you are going to cut your wall, ensure that you have enough depth to accommodate the inner design of your fireplace (the smoke shelf that is above the firebox, the flue that runs through the roof, and the fireplace itself). Also, think about the space you have available for the surround, and whether you'd like a fireplace mantle.
Many of the latest electric models of fireplaces have the depth of being almost hidden, giving them a "built-in" look. The Panorama BI-Deep series is an excellent example of this kind of wall-mounted electric fireplace. This model has a 5.8-inch depth that lets viewers to view the flames and ember bed and not the frame. It also comes with a choice of media packages including natural-looking driftwood logs that look like driftwood, white pebbles, or crystals made of clear glass that reflect the flames and add luster to the ember bed.
Gas wall-mounted fireplaces also come in deep and shallow models. When deciding the depth of your fireplace, it is crucial to keep in mind that these fireplaces are considered to be supplementary heating sources and must be properly vented by a skilled professional. When determining the depth for a gas fireplace, you need to consider the length of the vent pipe and the size of the chimney.
If you decide to go with a surface mount or recess-mounted installation, it is crucial to read and follow all of the instructions of the manufacturer when mounting your fireplace. A professional installer is recommended in all instances. It is also a good idea to have a second person available for the installation of a fireplace.
Addition of an in-wall fire space to your home is an excellent way to add value to it and add ambience. It can also help lower your heating costs. Moreover, it is a great option if you aren't able to install traditional fireplaces in your home due to the space restrictions or the location of an existing chimney.
Surface Mount
Surface mounts are an excellent option if you don't want to or aren't able cut into the wall to install an electric fireplace. They also give it a sleek built-in appearance. Some models, such as the Allusion line of electric fireplaces, can be positioned partially recessed into walls, without compromising heat output.
To begin the installation, mark the wall with pencil where the bracket will be placed. Use a stud-finder for locating the studs and place each bracket in front of at least one stud to ensure stability. If a stud isn't in reach or doesn't work for your fireplace, use anchors for drywall to support the mounting bracket.
Once you have identified the location of the mounting brackets on the wall using a power drill, you can use it to install them and make sure they are properly aligned with the studs. You can use studs or anchors made of plastic to attach each bracket. Once the mounting brackets have been put in place, lift your fireplace, then hang it on the wall bracket. Once the fireplace is installed ensure that it is level.
Before you begin the installation make sure to plug in your fireplace and ensure that all functions function properly. Then, light the fire, play around with the heating, the lighting of the ember bed, and the list goes on. Once you are happy with the results, it's time to put in the floating mantel.
Depending on the model of your fireplace, you'll require a wire connection to the appliance wire connector on the lower part of the mantel. Or if the fireplace has slots or hooks on the back, connect them to the slots on the wall mounting brackets. Once you've done that then, refer to the owner's manual for specific directions on removing the front glass panel and putting it back into the opening.
If you need to adjust the height and width, you should replace the glass front after you have removed the front panel. If your fireplace is equipped with ember bed media, spread it over the top of the grate to create a more natural appearance and then secure it in place by using the screws that come with it.
Plug-In
Unlike traditional wood-burning fireplaces, electric fireplaces don't require chimneys or vents. They plug into standard outlets and provide additional heating for rooms that can be that are up 400 square feet. They also offer multiple heating and flame settings, so that you can alter the ambience. Some models feature LED lighting effects that highlight the fire and ember bed. Others include the top grille grate which conceals manual controls, but easily can be opened to reveal pushbuttons for your preferred setting.
Plug-in electric fireplaces can be mounted directly on walls or built into the wall to create an elegant look. These fireplaces are usually simpler to set up than mantel fireplaces. Some come with pedestal bases to permit you to put the fireplace on a flat surface like buffets or dressers. A remote control along with mounting hardware and a log set are also included. Based on the model, electric fireplaces may include both heat and flame options that can be switched off to provide ambiance throughout the year.
Some models have adjustable privacy glass that you can change instantly from fully transparent to partially. This makes these models popular for walls that divide common entertainment spaces like living and dining areas. They can also be utilized in bedrooms where the addition of a new fireplace is a cost-effective way to reduce the chill in an area without compromising privacy.
While plug-in electric fireplaces don't need to be hardwired like traditional fireplaces, they must be mounted within a wall that is at a minimum free of studs and able to support the weight of the fireplace. Some models come with an accessory kit to make this process more simple, including a pre-wired power cord and a special mounting bracket. This kit is available for concrete or drywall installation.
If you choose to install your wall-mounted electric fireplace, be sure that it is near an outlet. Depending on the model, plug-in electric fireplaces can be connected to outlets that are on the same circuit, or a separate one for your electric fireplace. It is recommended to use a dedicated circuit so that no other appliances in the home will run on the same voltage and possibly trip your breaker.
